
TEO-540-C1A Engine Maintenance Manual
© 2022 Avco Corporation. All Rights Reserved
ECU to FST Connection
August 2022
Page 13
Field Service Tool User Manual
ECU TO FST CONNECTION
Connect the ECU to the laptop where the FST is installed
1.
Connect the USB plug end of the iE2 Field Service Tool CAN Interface (ST-530) to the USB
port on the laptop.
2.
Connect the CAN Interface plug end of the iE2 Service Cable (ST-528) to the CAN Interface.
3.
Connect the RCA plug end of the iE2 Service Cable (ST-528) to the airframe-supplied RCA
jack in the cockpit.
Figure 1
Laptop Connected to the ECU