Central Audio System
Wired Remote Controller
HS-80R
Welcome to use the central audio system. For better
use of this equipment, please read this manual
thoroughly before use.
Functional Characteristics:
Wired remote controller for family audio
control center, quick and convenient.
Touch key operation, deluxe appearance and
vivid LCD display.
Provided with the basic operating functions of
the host, including: audio source selection,
volume / tone control, query of MP3 playlist
and query of radio storage number from tuner,
etc.
One wired remote controller can control one
subzone by setting the address.
Able to control the external DVD and TV by
means of infrared learning functions of the
host.
Accept the control from infrared remote
controller.
Controllable distance up to 300m.
I. Description of Panel Functions
1. Infrared window
2. LCD screen
3. Select DVD Audio Source / Enter DVD Play
Interface / Enter Address Setting Interface
4. Select MP3 Audio Source / Enter MP3 Play
Interface / Enhance Bass Effect
5. Select Radio Audio Source / Enter Radio Play
Interface / Enhance Treble Effect / Adjust Address
Settings
6. Enter Volume & Tone Control Interface / Increase
Volume
7. Select PC Audio Source / Return to Main Interface
8. Select TV Audio Source / Enter TV Play Interface /
Attenuate Bass Effect
9. Select AUX Audio Source / Attenuate Treble Effect /
Adjust Address Settings
10. Remote Controller On/Off / Enter Volume & Tone
Control Interface / Decrease Volume / Confirm
Address Setting
II. Turn On/Off Remote Controller
1. Turn on Remote Controller
Switch on the power of the host and open the
related subzone from the host, so that this
remote controller is turned on. After that, the
main interface is
displayed on the
screen.
When the host has
been switched on,
you may press
any audio source
key
from
the
remote controller
to turn on this
remote controller.
In this case, the
screen displays the status before the
remote controller is turned off.
2. Turn off Remote Controller
You may switch off the power of the host to
turn off this remote controller.
You may hold down “ “ key (as shown in Fig.
2-1) for over 5 seconds to turn off this remote
controller.
III.
Description
of
Remote
Controller Status
Main Interface (Fig. 3-1): This interface
displays the status of 6 audio sources and
the volume in this subzone. What is displayed
in high brightness is the audio source being
played in this subzone.
Volume / Tone Control Interface (Fig. 3-2):
Under this interface, you may control the
volume and tone of this subzone.
Status Interface under Tuner Mode (Fig. 3-3):
Under this interface, you may switch the band
of tuner mode and load the radio stored on
the host.
Status Interface under MP3 Mode (Fig. 3-4):
Under this interface, you may select and play
the music for MP3 mode.
IV. Operating Instructions
1. Selection of Audio Source
Please refer to main interface. From the
interface, press down a key corresponding to
your desired audio source. When this audio
source is displayed in high brightness, this
indicates that it has been selected. Press down
the selected TNR or MP3 key again, so that the
screen will display the play status and
operating interface of tuner or MP3.
2.
Volume
Control
and
Tone
Adjustment
Press the volume / tone control key as shown
in Fig. 4-3 to enter the volume / tone control
interface. (Note: From any interface except the
volume / tone control interface, you may press
down the key of corresponding volume
indicating bar “ “ to enter the volume / tone
control interface).
The operation of volume / tone adjustment key is
as shown below:
3. Operating Instructions for Tuner Mode
Press down TNR key from main interface to
enter tuner mode interface (Fig. 4-1). Under
this interface, you may switch between FM and
AM band, select ration station and adjust the
volume. The key functions are as shown below:
（
Fig.
4-1
）
（
Fig.
4-2
）
（
Fig.
4-3
）
（图
4-4
）
(Fig. 2-1)
Enhance bass
Attenuate treble
Increase volume
Address Setting Interface
Enhance treble
Attenuate bass
Decrease volume
Return
to
the
main interface
