Rev #5
Version 1.01
July
2020
Page 17 of
34
4.8.3.1
Edit target (radar screen only)
Edit Flarm target
’s parameters. You can enter Flarm ID, gliders callsign, pilots neme, aircraft
type, registration, home airfield and communication
frequ
ency.
4.8.3.2
Select (waypoint screen only)
Select the waypoint from all of the waypoint files loaded to the unit. Use rotary knob to cycle
beetween letters and use left and right push buttons to move to
previus/next letter. Once
you have selected the desired waypoint pres the rotary button to navigate to it.
4.8.3.3
Select near (waypoint screen only)
Select near allows you to navigate to the nearest waypoint. Waypoins are displayed in the
list sorted by disatnce from the glider. Use rotary knob to select desired one and short press
it to navigate to it.
4.8.3.4
Start (task screen only)
Start the task. This option is only valid if you have prepared task in the “
Edit
“
quick acces
manu option.
4.8.3.5
Edit (task screen only)
In thes manu item you can prepare your task. Once task is generated it is also sent to the
Flarm device automatically. By short presing the knob an additional sub manu will open with
following options:
4.8.3.5.1
Edit
This option allows you to edit the curenly selected waypoint. To select the turnpoint use the
knob to choose the letter and left/right push buttons to select the previus/ne
xt chara
cter.
Short clik the knob to confirm
4.8.3.5.2
Insert
Insert allows you to add (insert) a new turnpoint after the selected turnpoint. This can be
done in the middle of the currently edited task or at the end.
4.8.3.5.3
Delete
Delete the currently selected turnpoint.
