Connecting Vehicle Power
Connecting Vehicle Power
Complete vehicle cradle mounting and power instruction is contained in the VX3X Cradle Guide.
Vehicle 12-80VDC Power Connection
Caution:
For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This
fused circuit requires a two Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply
connection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the
battery positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.
Caution:
For installation by trained service personnel only.
Warning:
Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well ventilated
area. Avoid creating arcs and sparks at battery terminals.
1. To Vehicle Battery
2. To VX3X
3. Red (DC+)
4. Black (DC-)
5. White (GND)
6. 12 – 80 VDC
E-EQ-VX3XOGWW-G-ARC [ 10 ] VX3X User Guide
