LXE MX8WM Скачать руководство пользователя страница 87

Страница: 87 / 280

Bluetooth

Bluetooth

Start | Settings | System | Bluetooth

Discover and manage pairing with nearby Bluetooth devices.

Factory Default Settings

Discovered Devices

None

Settings

Turn On Bluetooth

Enabled

Report when connection lost

Enabled

Report when connected

Disabled

Report failure to reconnect

Enabled

Computer is connectable

Enabled

Computer is discoverable

Disabled

Prompt if devices request to pair

Disabled

Continuous search

Disabled

Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, pair, connect and
disconnect. There may be audible or visual signals as paired devices re-connect with the mobile device.

The default Bluetooth setting is Off. If the Discover button is not active, check the Bluetooth status on the Settings tab.

The MX8WM cannot be discovered by other Bluetooth devices when the

Computer is discoverable

option is disabled

(unchecked) on the Settings panel.

Other Bluetooth devices cannot be discovered if they have been set up to be

Non-Discoverable or Invisible.

The MX8WM can pair with one Bluetooth scanner and one Bluetooth printer.

Paired scanners and printers do not need to be deleted before a different scanner or printer can be paired with the
MX8WM.

The Bluetooth device should be as close as possible (line of sight) to the MX8WM during the pairing process.

E-EQ-MX8WMRG-C [ 76 ] MX8WM Reference Guide

Содержание MX8WM
























































































































































































































































































Результаты поиска

Содержание MX8WM

Отзывы:

Бренды по названию

Популярные бренды

LXE MX8WM, Справочное руководство

Результаты поиска

Содержание MX8WM

Отзывы:

Бренды по названию

Популярные бренды