manualshive.com logo in svg

LXE MX7, Справочное руководство

Поделиться
Скачать
LXE MX7 Скачать руководство пользователя страница 32

26 

Install / Remove Vehicle Cradle Adapter Cup and Top Adapter 

MX7 Cradle Reference Guide 

E-EQ-MX7DKRG-C 

Install / Remove Vehicle Cradle Adapter Cup and Top Adapter 

Equipment Required -- 

Phillips screwdriver and torquing tool (not supplied by LXE). You will 

need a torquing tool capable of torquing up to 6 in/lb (+/- .5 in/lb)  for the cradle adapter cup. 
LXE recommends using a clean, well-lit stable surface.  

The vehicle cradle is shipped with the cradle adapter cup and Retainer Insert pre-installed. 

The MX7 cradle charging pocket, without a cradle adapter cup and top adapter, is designed for an 
MX7 

with a rubber boot

 (MX7A490PROTBOOTBLK or MX7A491PROTBOOTYEL) 

enclosing/protecting the mobile device. 

Before docking an MX7 

without a rubber boot

 in the vehicle cradle, re-install the MX7 adapter 

cup and Retainer Cap Insert.  

Install Adapter Assembly 

 

Figure 18  Charging Pocket Adapter Cup 

The adapter cup is installed facing in one direction.  

1.

 

Slip the adapter cup into the cradle charging pocket, aligning the screw hole in the adapter 
cup with the screw hole in the charging bay.  

2.

 

Using a torquing screwdriver, insert the screw in the adapter cup screw hole, and torque the 
screw to 6 in/lbs +/- .5 in/lbs. 

 

Содержание MX7





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды