LXE MX5X, Справочное руководство

Страница: 269 / 296

252 Single Application Configuration
MX5X Reference Guide E-EQ-MX5CERG-D
Control Panel
Control Panel
Note: If your Administrator Control Panel does not look like the figure shown above, you may
have the Multi-Application version.
Use the Control tab options to select the application to launch when the device boots up.
Move the cursor to the Application text box and either type the application path or tap the Browse
button (the … button). The standard Windows CE Browse dialog is displayed. After selecting the
application from the Browse dialog, tap OK.
Enter the command line parameters for the application in the Command Line text box.
Enter the number of seconds the selected Application must wait before starting to run upon reboot.
If no application is specified when the Administrator Control panel is closed, the device reboots
into Administrator mode. If a password has been set, but the application has not been specified,
the user will be prompted for the password before entering administration mode. The password
prompt remains on the display until a valid password is entered.
End User Internet Explorer
AppLock supports applications that utilize Internet Explorer, such as .HTML pages and JAVA
applications. The end user can run an application by entering the application name and path in
Internet Explorer’s address bar.
To prevent the end user from executing an application using this method, the address bar and
Options settings dialog are restricted in Internet Explorer. This is accomplished by creating an
Internet Explorer that is used in end user mode, End-user Internet Explorer (EUIE). The EUIE
executes the Internet Explorer application in full screen mode which removes the address bar and
status bar. The Options Dialog is also removed so the end user cannot re-enable the address bar.
The administrator specifies the EUIE by simply checking the Internet checkbox in the Control tab
of the Administrator applet. The internet application should then be entered in the Application text
box. If the standard Internet Explorer that is shipped with the device is desired, it should be treated
like any other application. This means that IEXPLORER.EXE should be specified in the
Application text box and the internet application should be entered in the command line. In this
case, do not check the Internet checkbox.