LXE MX5X, Справочное руководство

Страница: 242 / 296

Multi-Application Configuration 225
E-EQ-MX5CERG-D MX5X Reference Guide
Multi-Application Configuration
Access: | Settings | Control Panel | Administration icon
The default Administrator Hotkey sequence is Shift+Ctrl+A .
Note: AppLock cannot support multiple windows of some applications. Attempting to open
multiple windows of RFTerm or Pocket Word will cause AppLock to switch to
administration mode.
Application Panel
or
Figure 6-4 Application Panel – Multi-Application
Note: If your Application Panel does not look like the figures shown above, you may have the
Single Application version. Refer to Appendix C – Reference Material, AppLock - Single
Application Version for instruction.
Use the Application tab options to select the applications to launch when the device boots up in
End-user Mode.
If no application is specified when the Administrator Control Panel is closed, the mobile device
reboots into Administrator mode. If a password has been set, but an application has not been
specified, the user will be prompted for the password before entering administration mode. The
password prompt remains on the display until a valid password is entered.
Option Explanation
Filename Default is blank. Move the cursor to the Filename text box and either type the
application path or tap the Browse button (the … button). The standard Windows
CE Browse dialog is displayed. After selecting the application from the Browse
dialog, tap OK.
Title Default is blank. Enter the Title to be associated with the application. The
assumption is that multiple copies of the same application may need unique titles
in order to differentiate them in the application switcher panel.
Arguments Default is blank. Enter the command line parameters for the application in the
Arguments text box.