LXE MX5X, Справочное руководство

Страница: 172 / 296

Summit Client Configuration 155
E-EQ-MX5CERG-D MX5X Reference Guide
Summit Tray Icon
The Summit tray icon provides access to the SCU and is a visual indicator of link status.
The Summit tray icon is displayed when:
•
The Summit radio is installed and active.
•
The Windows Zero Config utility is not active.
•
The Tray Icon setting is On.
•
Tap the icon to launch the Summit Configuration Utility.
Use the tray icon to view the link status:
Summit client is not currently associated or authenticated to an Access Point.
The signal strength for the currently associated/authenticated Access Point is -80 dBm or
weaker.
The signal strength for the currently associated/authenticated Access Point is stronger than
-80dBm but not stronger than -60 dBm.
The signal strength for the currently associated/authenticated Access Point is stronger than
-60 dBm but not stronger than -40 dBm.
The signal strength for the currently associated/authenticated Access Point is stronger than
-40 dBm.
Wireless Zero Config Utility and the Summit Client
The WZC utility has an icon in the toolbar that looks like networked computers with a red X
through them, indicating the Wireless Zero Config application is enabled and the MX5X is not
connected to a network. You can use either the Wireless Zero Configuration Utility or the Summit
Client Utility to connect to your network.
LXE recommends using the Summit Client Utility to manage wireless connectivity.
To use Wireless Zero Config, first open the Summit Client Utility.
1. Select ThirdPartyConfig in the Active Config drop down box.
2. A message appears that a Power Cycle is required to make settings activate properly. Tap OK.
3. Tap the Disable Radio button to remove the connection to the Summit Client Utility. The text
on the button changes to Enable Radio.
4. Tap the Power button to place the MX5X in Suspend, then tap the Power button to wake the
MX5X from Suspend mode.
The Wireless Zero Config utility begins.