LXE MX1-IS, Справочное руководство

Страница: 48 / 164

38 Installed Software
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
\UTILS
BBDIS35.EXE NOT USED. Battery Discharge Utility. Condition the 50 mAh NiCd
Backup Battery mounted on the system board. The battery discharge
starts and when discharged switches to backup battery charge mode.
BBTST35.EXE NOT USED. Backup Battery Test Utility. Indicates the current status of
the backup battery and the voltage.
BCWEDGE.EXE NOT USED. Barcode Wedge utility. Interprets data from barcode
scanner as keyboard data..
BEEP35.EXE Beeper Utility. Changes the volume of the beeper using the up and down
arrow keys on the keypad/keyboard.
COMTST35.EXE NOT USED. Communication Port Utility. To diagnose the serial
communication port, a simple loop back test routine is included in this
file. The figure showing how to build a loop back plug is included in this
chapter. The test results will read PASS or FAIL. A failure is identified
and described.
DISP35.EXE Display Utility. Activates every pixel on the display to verify
functionality.
KEY2335.EXE Keyboard Utility. This utility performs a contact functional test of each
key on the keyboard. When activated, the key labels appear on the screen
and then each key, when initialized, clears the key label from the screen.
LXEF.EXE NOT USED. File Transfer Utility. Transfer files using serial port or IR
ports.
PARAM35.EXE Parameter Dump Utility. This utility collects the setup configurable
parameters and lists them in a text file.
SETAPI_4.EXE Set An API Function. Runs an API call to set a mode or change a
parameter.
REV.BAT Displays current revision identifier.
Note: Files that are loaded on the MX1-IS and NOT USED may be deleted at a later date to
increase available disk space.