LXE MX1-IS, Справочное руководство

Страница: 36 / 164

26 Endcaps
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
Endcaps
The MX1-IS can be configured with several different scanner endcaps. Endcaps are mounted on
the top of the computer case and contain the beeper and scan engine. All endcaps use ZIF
connectors to maintain permanent connection between the endcap and the MX1-IS.
See “Integrated Scanner Programming Guide” when setting up scanner parameters for the scanner
endcaps.
COM1 / COM2
A MX1-IS scanner endcap is COM1. The MX1-IS’s IR Port is COM2 and is inoperable. The
COM1 port uses Data Carrier Detect and Ring Indicator as computer wake-up events only.
Scanner Endcaps
Refer to the MX1-IS User’s Guide and the section titled “Important Safety Instructions
and Warnings” and “Scanner Warnings and Labels” for important laser safety
information
before using the scanner.
The MX1-IS Barcode Scanner Endcap is used to collect barcoded data from any nearby
compatible barcode label. Depending on the size of the barcode, size of bars and spacing and
quality of the barcode, the scanners are used to read barcodes at the distances shown in the
“Integrated Scanner Programming Guide", section titled "Decode Zones".
After running the program, BCWEDGE, on the MX1-IS first -- the LXE scanner modules are
activated when the Scan button or the trigger on the handle is depressed.
Scanner Endcap LEDs and
Beeper
Figure 2-7 Scanner Endcap LEDs and Beeper
1 Laser On Indicator
2 Beeper
3
Good Read Indicator
The left LED (1 - Laser On Indicator) on the top of the laser barcode endcap will light, indicating
laser emission when the laser beam is being emitted. Following a good read, the right LED (3 -
Good Read Indicator) flashes, indicating a successful scan. Beeps may be heard (2) after a good
read, depending on the application running on the MX1-IS. The beep function is activated by
external software programs running in the MX1-IS.