LXE MX1-IS, Справочное руководство

Страница: 129 / 164

E-EQ-MX1ISRG-F MX1 I-Safe Reference Guide
Appendix C Commands
Introduction
This appendix describes the Datalight ROM-DOS commands that are loaded in the MX1-IS by
LXE . The information in this chapter is taken from Datalight’s “ROM-DOS 6.22 User’s Guide”
and is used by permission.
Refer to Chapter 4 “System Configuration”, section titled “Directory Listing”, subsections titled
“C:\ROOT” and “\DOS” for a list of all ROM-DOS files loaded on the MX1-IS.
REMDISK, REMSERV, PRINT, SYS.COM and the MX1-IS
These programs require an RS-232 port and null modem cable or a separate disk. These
commands will not function on the MX1-IS.
ROM-DOS Commands
Each entry includes an explanation of the command's purpose, the command entry syntax,
remarks, and examples. Where applicable, command syntax and parameters are given. Parameters
may be supplied using either uppercase or lowercase letters, and the hyphen (-) may be substituted
for the forward slash (/).
Each command also has a label to designate whether it is an internal or external command.
Internal commands are part of the command processor program, COMMAND.COM. These
functions are available only while COMMAND.COM is running. External commands are actually
stand-alone utility programs. They are independent from COMMAND.COM.