LXE MX1-IS, Справочное руководство

Страница: 110 / 164

100 Memory
MX1 I-Safe Reference Guide E-EQ-MX1ISRG-F
Memory
This section lists possible solutions to some common memory problems.
Conventional Memory
If your program reports that there isn't enough memory for it to run, you may not have enough
conventional memory available for that program. To determine the memory needs of the program
and the availability of memory in the MX1-IS, follow these steps:
1. Check the software documentation to see what kind of memory the program can use
(conventional, extended or expanded).
2. At the system prompt, type MEM to run the DOS MEM command and check how
much conventional memory is left for your programs. (MEM reports the number of
bytes available.)
3. Refer to the program's documentation to verify that this is enough memory to run the
program. If not, you may need to remove device drivers or memory-resident programs
from the CONFIG.SYS or AUTOEXEC.BAT files. (If unsure of how to accomplish
this, contact LXE Technical Support.)
When you start the computer and it displays an error during the memory test, write down the error
and contact LXE Technical Support.
Extended Memory
To use software with extended memory, the software must be compatible with the Extended
Memory Specification (XMS).