Operation
19
E-EQ-MX1ISOGWW-J
MX1 I-Safe User’s Guide
Adjust Display and Volume
Set The Display Contrast
Adjusting screen contrast lightens or darkens the characters on the screen to make them visible at a
comfortable level. The contrast is incremented or decremented one step each time the contrast key
is pressed.
Full Alpha-Numeric
The full alpha-numeric keypad does not have a contrast key legend. Adjust the display contrast by
pressing the:
•
2
nd
key, then the Shft key then the <C> key to enter Contrast change mode.
•
Use the Up Arrow and Down Arrow keys to adjust contrast until the display lightens or
darkens to your satisfaction.
Press the Enter key to exit this mode.
Numeric-Alpha Keypad
To adjust screen contrast, locate the <F11> key at the bottom of the keypad. Adjust the
display contrast by pressing the:
•
2
nd
key, then the <F11> key
•
Use the Up Arrow and Down Arrow keys to adjust contrast until the display lightens or
darkens to your satisfaction.
Press the Enter key to exit this mode.
Set The Beeper Volume
Note:
An application may override the control of the beeper volume.
The audible alert or “beeper” volume can be adjusted to a comfortable level for the operator. The
volume is increased or decreased one step each time the volume key is pressed.
Full Alpha-Numeric
The full alpha-numeric keypad does not have a Volume key legend. Adjust the beeper volume by
pressing the:
•
2
nd
key, then the Shft key then the <V> key to enter Volume change mode.
•
Use the Up Arrow and Down Arrow keys to adjust contrast until the beeper volume is
satisfactory.
Press the Enter key to exit this mode.
Numeric-Alpha Keypad
To adjust the beeper volume, locate the <F12> key at the bottom of the keypad. Adjust
the beeper volume by pressing the:
•
2
nd
key, then the <F12> key
•
Use the Up Arrow and Down Arrow keys to adjust contrast until the beeper volume is
satisfactory.
Press the Enter key to exit this mode.
