14
Power Button Functions
MX1 I-Safe User’s Guide
E-EQ-MX1ISOGWW-J
Power Status and the Status LED
Figure 13 Power Status and the Status LED
The Status LED is located next to the LXE logo on the MX1-IS. The LED changes color and state
depending on power status.
Status LED
Condition
Off MX1-IS
is
Off.
OR
The MX1-IS is powered On and the display is On.
Steady Green
The MX1-IS is powered On and the display is Off. Press any key to
turn the display On.
Blinking Green
The MX1-IS is in the Suspend state. Tap the Power key to exit the
Suspend state. Hold the Power key down for 4 beeps to turn the MX1-
IS off. There may be a brief wait while the MX1-IS synchronizes with
the RF network.
Steady Red
Main Battery Low Warning or Low Main Battery. Replace the main
battery.
Blinking Red
Main Battery Power Failure or the Main Battery is depleted. Replace
the main battery. The MX1-IS will turn off in 5 minutes (default or the
value selected in BIOS Setup for the Off Timer limit) if no action is
taken.
Power Management and the
Keypad
Status LED is Steady Green. When the MX1-IS is in the Display Off state, any keypress returns
the computer to the On state and the display activates. The key pressed (key value) is not sent to
the Operating System or application.
If the 2
nd
, Ctrl, Shift, or Alt keys were active (and the icons were on the display) when the MX1-IS
entered Display Off or Suspend, the modifier keys and their icons are cleared from the display
when the MX1-IS wakes up.
