6
Display
MX1 I-Safe User’s Guide
E-EQ-MX1ISOGWW-J
Display
Figure 7 MX1-IS Display
The MX1-IS display is a transflective monochrome backlit LCD unit capable of supporting gray
scales.
Icons
Across the top of the display are icons that provide visual cues to current computer operation.
Icon
When highlighted ...
CAPS
CAPS is on when upper case letters are selected. To enable or disable CAPS, press
2nd, then SHIFT, then the left arrow key.
2nd
The 2nd functions of the keypad are active.
Low Main Battery indicator. This indicates that the Main Battery Pack charge is
low and the battery should be replaced.
AAA
This is the backup battery indicator for LXE MX1-IS devices. The MX1-IS device
does not have a backup battery.
This indicator can be ignored.
Alpha
Numeric-Alpha keypad only
. The A/# key is in Alphabetic mode. Operation in
Numeric Mode is indicated by the absence of the Alpha icon. Toggling between
Alphabetic and Numeric modes is accomplished by pressing the A/# key.
Ctrl
The Control functions of the keypad are active.
Alt
The Alternate functions of the keypad are active.
Shift
Shift keys output between upper and lower case letters.
Cleaning the Glass Display/Scanner Aperture
Note:
Do not perform the following steps in a hazardous environment.
Keep fingers and rough or sharp objects away from the scan aperture and display. If the glass
becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)
without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based
cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free
cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.
