Electrical Shock Hazards
The following precautions should be observed to avoid the risk of electrical shock hazards associated with charging
batteries:
The Bluetooth Ring Scanner Battery Single-bay Charger or Multi-Charger have been designed for indoor use only.
Do not operate outdoors or in extremely high humidity environments. Do not expose chargers to rain, snow or wet
conditions.
Unplug the chargers from power source before cleaning. Use only mild detergent with a slightly damp cloth to clean
the outside of the chargers. Do not use solvents or flammable cleaners. Allow the case to dry fully before using
again.
Use of attachments or accessories not recommended by LXE could result in fire, electric shock or injury.
These appliances must be properly grounded. If they should malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. These appliances are equipped with a cord
having an equipment grounding conductor and ground outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Do not operate the chargers with a damaged AC cord or plug. LXE does not
recommend the use of any extension cord with the Bluetooth Ring Scanner Battery Single-bay Charger or Multi-
Charger.
The Bluetooth Ring Scanner Battery Single-bay Charger or Multi-Charger have been designed for use on a nominal
100 or 120 volt or nominal 220 or 240 volt circuit and have a grounding attachment plug. The plug is an IEC
configuration that is appropriate for your country and regulations. Make sure that the appliance is connected to an
outlet having a configuration similar to the plug. No adapter should be used with these appliances. Improper
connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliances. If the plug will not fit in the outlet, have a proper outlet
installed by a qualified electrician.
Do not disassemble the Bluetooth Ring Scanner Battery Single-bay Charger or Multi-Charger. They contain no user
serviceable parts.
Warning
:
The Bluetooth Ring Scanner Multi-bay Charger is to be used to charge an I.T.E.
Recognized Battery pack manufactured by Helix Co., Ltd. (Model: HNP-40, LXE,
P/N 161987-0001, rating 3.7V, 750mAh). Charging any other type of battery pack
in the Bluetooth Ring Scanner Multi-bay charger is prohibited.
Warning:
Use the provided AC power supply, only, with the Bluetooth Ring Scanner Multi-
bay Charger. Using any other type of AC power supply is prohibited.