LX Navigation LX Eos 57, Руководство пользователя

Страница: 47 / 49

Document Name:
LX Eos user’s manual
Version: 1.7
Page 46 of 47
22.2.4 Event function
User has option to set one of the user inputs to Event. If event switch is pressed during flight, it will enable
faster record interval in flight recorder (recording in shorter intervals as default for a limited time). Event
parameters can be set in Setup/Logger
on LX Eos unit. The action is accompanied with a clear message.
22.2.5 Task start
It is started automatically when glider leaves start TP observation zone. Navigation to next point will start. If
pilot wishes to navigate back to starting point, he must simply use
“
Goto
”
option in task setup menu. Please
refer to Task page chapter.
No task statistic is available on LX Eos.
22.3 After landing
It is recommended to keep the instrument ON for a few minutes after landing. This will ensure base line of
baro trace.
10s after landing is detected, statistic page will be shown automatticaly where 10min countown can be seen.
Pilot can wait for 10min of press enter to end flight. Calculating security message will foll ow and then
logbook will be offered to the pilot. At this point unit can be switched OFF or flight download process can
start.
22.3.1 Downloading flights
Insert micro SD card to external micro SD card holder. Select logbook page and search for a flight that you
wish to download. Press enter on that flight and select Copy option. Progress bar will inform pilot when flight
is copied to external SD card. File format of flight is .IGC.