
LX Era
Device setup
Document name:
LX EUM
Document revision:
R1
5.2.6
Network
This part of the manual will only go through the settings available in the Network sub-menu
part. For information on how to connect to different devices and utilize the Era’s connectivity
capabilities, please check the
section of this manual.
The Era has a single module used for both Wifi and Bluetooth. The module has five different
available states:
•
Off -
no connectivity options are available
•
Bluetooth server -
is used for transmitting data to an external device - like an Android
phone or PDA/PNA device. The external device needs to connect to the Era in order to
establish communication.
–
The wireless setup will show the device name and password.
•
Bluetooth client -
is currently not available for use. Once enabled, will give the Era the
possibility to connect to an external Bluetooth device.
–
The wireless setup will show a list of available devices for connection.
•
WiFi Access point -
is currently not in use. Once enabled, will give the Era the possibility
to stream data through the WiFi network.
–
The wireless setup will show the device information and offer the user to change
WiFi name and password of the Era’s WiFi.
•
WiFi Client -
is used for connecting an Era to a WiFi network. Once connected, the Era is
able to communicate with the world wide web and send flights via emails.
–
The wireless setup will show a list of available devices for connection.
This setup also includes the email setup page. Once opened, you are presented with a set of
email-related options.
You can create and activate multiple emails at once. When a flight is chosen for sending over
the email in the
Logbook/Flight statistics page
, it will be sent to all active emails.
When connecting to a device, either through Bluetooth, or WiFi, an icon to the right of the
device names is shown. This icon shows what is the state of the device connection, or it’s
signal strength.
•
Strong signal
-
•
Medium signal
-
•
Weak signal
-
•
Connecting
-
•
Password required for network
-
In general, all available devices are shown under the ’Available list’. If the Era is connected to a
device, it will be shown under the ’Connected’ list.
Device manual
Public
70