MODEL CEPS-36W INSTALLATION INSTRUCTIONS
1
LVS
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216
Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
Web: WWW.LVSCONTROLS.COM
LVS, Inc. warrants to the original purchaser/user for the published warranty period from the date of shipment that should LVS instruments or
equipment prove defective by reason of improper workmanship or material, LVS will repair or replace the same equipment without charge.
This warranty does not cover defects or malfunctions arising from improper installation, operation or repair, or neglect, accident, or abuse. LVS
will honor its warranty provided the equipment has not been physically damaged or improperly installed or connected. To obtain warranty/re-
pair, the defective product should be shipped freight prepaid within the warranty period to the address below. To the extent permitted by
applicable law, all warranties extending beyond repair or replacement as described above are disclaimed, including the implied warranties of
merchantability and fitness for a particular purpose. Where applicable law prohibits disclaimers or the implied warranties of merchantability
and fitness; those warranties are limited to 12 months from date of shipment. LVS provides a 90 day money back guarantee if equipment
does not perform in accordance with LVS published specifications. The liability of LVS and its agents under all warranties is limited to repair and
replacement as described herein and under no circumstances shall there be liability for any other kind of loss, damage, or labor, either conse
-
quential or for injury to person or property or otherwise.
5-Year Limited Warranty
1. Make sure all connections are in accordance with the National Electrical Code and local regulations.
2. To reduce the risk of electric shock, disconnect both normal and emergency power supplies before servicing.
3. This product is suitable for use in dry or damp locations. Do not mount it near gas or electric heaters, air
outlets or other hazardous locations.
4. An unswitched AC power source is required (120-277VAC, 50/60Hz).
5. Use this product in 0ºC minimum 50ºC maximum ambient temperature
6. Do not attempt to service a sealed product. When malfunctioning, return to the manufacturer: LVS, Inc.
2555 Nicholson Street, San Leandro, CA 94577.
7. The use of accessory equipment is not recommended and may cause unsafe condition and void warranty.
8. Do not use this product for other than its intended use.
9. Installation and service should be performed only by qualified service personnel.
10. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
11. UL924 listed for both factory and field installation.
12. Do not attempt to service the batteries. A sealed, maintenance-free battery is used which is
not field-replaceable. Contact manufacturer for replacement guidelines.
13. Intended for use with LED, incandescent, fluorescent fixtures.
! IMPORTANT SAFEGUARDS !
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
Electrical Specfications
120/277VAC, 50/60Hz Sensing Input
120/277 60Hz Output
Max Output Power: 36W for Ambient Temp: 10C-55C
Max Output Power: 27W for Ambient Temp: 0C-10C
UL
®
UL924 LISTED
C
US
