LV switch IPPBX8000, Руководство пользователя

Страница: 56 / 199

LvSwitch IPPBX 8000 Manual
54
Table 4- 7 Add Port Mapping
5.2.6 UpnP Setting
Upnp can be optional enable or disable.
5.2.7 Host Name setting
Virtual domain Settings allow users to set the domain name to access the corresponding Intranet IP address.
Select Network >Advance options> Host name, the page will pops up as the figure 5-19.
Figure 5-19 Host name setting page
Host name setting description as following:
Table 5-9 Host name setting description
Port
Any ports
：
In this mode, all ports will be mapped.
Designated port
：
Users need to configure the “Intranet port” and ”Extranet
port”.
Protocol
The data connection protocol used when port mapping
，
options include
All,TCP or UDP.
Internal IP The intranet IP that neet port mapping
Interface
WAN port
、
WAN3G or User Defined are available.
External IP
Network Interface selected as “ External IP”, set the IP address of the
extranet used by the port mapping, which must belong to the NAT address
pool.
Status Optional, Enable or Disable.
Interface Instruction
IP address Intranet IP address
Host name
Set the host name of the intranet IP,1-67 character length