LV switch IPPBX3000, Руководство пользователя

Страница: 55 / 195

LvSwitch IPPBX 3000 Manual
53
Figure5-17 Port Mapping Configuration
Click <Add> button to open Add Port Mapping page shown in Figure 4-16.
Figure5-18 Add Port Mapping
Table 4- 4 Add Port Mapping
5.2.6 UpnP Setting
Upnp can be optional enable or disable.
5.2.7 Host Name setting
Virtual domain Settings allow users to set the domain name to access the corresponding Intranet IP address.
Select Network >Advance options> Host name, the page will pops up as the figure 5-19.
Item Description
Port
Any ports
：
In this mode, all ports will be mapped.
Designated port
：
Users need to configure the “Intranet port” and ”Extranet
port”.
Protocol
The data connection protocol used when port mapping
，
options include
All,TCP or UDP.
Internal IP The intranet IP that neet port mapping
Interface WAN port
、
WAN3G or User Defined are available.
External IP
Network Interface selected as “ External IP”, set the IP address of the
extranet used by the port mapping, which must belong to the NAT address
pool.
Status Optional, Enable or Disable.