LV switch IPPBX3000, Руководство пользователя

Страница: 167 / 195

LvSwitch IPPBX 3000 Manual
165
Table 7-1 add connection numbers restriction policies
Terms Description
Limit policy name define a policy name by entering 1-32 characters.
Status: select "enable", the policy is in effect; select
"disable", the policy is not in effect.
Connection status Select enable or disable
Issued objects Physical port: Select physical ports and set the physical
ports that are limited by this policy
VLAN ID:Select "VLAN ID" and set the VLAN
network segment limited by this policy. For the
network segment corresponding to VLAN ID, please
refer to "Lan setting >VLAN setting for LAN
interface".
IP address: select "IP address" and set the IP address
restricted by this policy. IP range: select "IP range" and
set the IP range restricted by this policy.
Connection mode
Single IP connection limit: limit the number of
connections of each user in the distribution object.
When the number of connections of a single user
exceeds the set value, it must wait until the connection
is broken to establish a new connection.
Total connection limit: limits the number of
connections for all users in the distribution object
Connection type
Select "all" to limit all connections and "TCP" to
limit TCP connections. Select "UDP" to limit UDP
connections, and select "other" to limit other
connections.
Save
Click the < save > button to add a policy to the
page
After successfully adding the policy, click the < edit > button to modify the policy; Click the < delete >
button to delete the policy. Match the strategy according to the order from the top down, and adjust the
strategy order by < move > up, < move > down.
7.2.3 5-Turple Filter
When a quintuple filtering strategy is added, the device will filter the data message matching the quintuple
strategy, that is, the data message matching the quintuple strategy is discarded.