Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: 847/244-1818 • 800/327-1698
Instruction Sheet
Models AVJ-42, AVJ-42C
AVJ42
AVJ-42C
Models AVJ-42, AVJ-42C
1 - rubber mat
Tools Required:
For Cabinet Models Only:
4 - 4˝ casters, 2 w/brake
1 - slotted screwdriver
2 - keys
4 - bolts
1 - rubber mallet
4 - Kep nuts
1 - Electric Assembly with Hardware
Parts List
Position top stand assembly over bottom stand assembly, as
illustrated.
NOTE: Be sure cabling hole in corner of top and middle
shelves line up on top of each other.
Adjust top stand assembly up or down to desired height. Align
holes in all four legs, insert bolts and fasten with four Kep
nuts, as illustrated.
2
Handle Holes
Cabling Holes
Top
Stand
Assembly
Bottom
Stand
Assembly
Kep Nut
Bolt
Turn bottom stand assembly upside down on a smooth
surface. Push the four casters firmly into the caster
socket holes in bottom of each leg as illustrated.
IMPORTANT: Casters must be fully seated. Tap with
rubber mallet firmly to properly seat casters. Turn the
stand right side up.
Back
Front
Place Locking Casters
as illustrated
1
https://www.supplychimp.com/
