EN
HEATER FUNCTIONS
1.
To start the heater, first adjust the body angle and its position properly. The moment
the heater is powered, it accepts the position it’s in as the 0 (zero) point. According
to that, the falling safety turns on after a certain angle. To adjust the heater's 0 (zero)
point, unplug the power cord. After that, when you have adjusted the proper position,
plug the power cord back in. That way, the heater can work in proper positions and
can turn its falling safety on when it’s in improper positions.
2.
You can turn the heater on with the function button on it or with the remote control.
To turn the heater on or off with the remote, pressing the ''On/Off'' button is enough.
3.
When you first open it, the screen will display ''P1''. This means '' 1. heating level''.
This screen is also named the ''Program'' section. The ''P'' button on the remote
directs you to the ''Program'' section. While on this screen, you can choose from
heating levels P1 to P6 with up and down buttons.
4.
With the timer function, you can make adjustments to the timer for 1-9 hours. When
the set time has expired, the heater will turn itself off and give a warning sound.
When you enter the timer screen while the timer is active, you will first see the
remaining time.
5.
The heater can be used in thermostat mode by entering a temperature value
between 18-37 ° with the thermostat function. When the relevant temperature
value is reached, the heater operates itself at P1. After the temperature has
dropped by 2 °, a cycle is entered to reach the old value again. While the
thermostat is active, the last recorded temperature value will appear when you enter
the thermostat screen for the first time.
6.
The heater has falling protection. Before connecting the heater's power cable to the
outlet, adjust the position and angle of the heater body well. Because from the
moment you plug the plug into the socket, it will accept its location and angle as the
starting point. To redefine the starting point of the heater, you will need to unplug it
and plug it back in.
7.
When you don't have the remote control, you can operate the heater via the
function button on the body. When the heater has turned on, with each press of
the function button, the heating level will increase by one. When you press the
function button after reaching heating level P6, the heater will turn itself off.
8.
The heater has overheating protection. In case of overheating, the heating level
will drop down to P1. If overheating still continues, the heater will give a warning and
turn itself off. To turn the heater on again, you must unplug the plug and plug it in
again.
9.
If the heater continuously operates for 12 hours, it will automatically turn itself off and give
a warning sound. To turn the heater on again, you must unplug
the plug and plug it in again.
17
This heater is not equipped with a room temperature
control device. Do not use this heater in areas where
people who are not able to leave the room on their own,
unless there is constant supervision.