ACCESSORIES
POWER ADAPTERS
The OMT-8B is supplied with the LTIPS-6 shown below on the
right. An optional universal cube LTIPS-6-2-U shown on the left
OMT-8B
MP-6 and MP-6P
may also be ordered.
T
his is a 19 inch, 1RU mounting panel for 6 modems. The basic
Fiber Optic Ethernet Transceiver
unit comes complete with all necessary mechanical hardware, with
the exception of the mounting screws necessary to attach the
panel to the rack . The un-powered version MP-6 is shown in the
picture.
Operating Manual
LTIPS-6-2-U
LTIPS-6
The powered version, MP-6P adds the power supply and the
ORDERING INFORMATION
harness shown below. The power supply has universal AC input.
100-240Vac (LTIPS-6-2-U).
OMT8B-M-ST
850nm Standard version, ST connector
OMT8B-M-SC
850nm Standard version, SC connector
OMT8B-MM-ST
1300nm multimode version, ST connector
OMT8B-MM-SC
1300nm multimode version, SC connector
OMT8B-SM-ST
1300nm singlemode version, ST connector
OMT8B-SM-SC
1300nm singlemode version, SC connector
MP-6
Un-powered rack
MP-6P
Powered rack
MC-OMT8B
Mounting clip
LTIPS-6
6V DC, 300mA power cube (supplied)
LTIPS-6-2-U
6V DC, 2A Universal cube
MC-OMT8B
(Input voltage 100-240Vac, 50/60Hz)
This is a machined plastic mounting clip, used for surface mounting
the modem. The clip may be mounted to any flat surface using
Manual Revision Record
two screws (user provided) or with double-sided adhesive tape
m
Revision 1.0 is the original version
(user provided). The modem simply snaps in and out of the clip.
m
Revision 1.1 added new photograph, added information to
specifications, added
ACCESSORIES
section.
m
Revision 1.2 updated specifications, added SC connector
information, updated mounting section
m
Revision 1.3 converted manual to foldout format, corrected
accessory part numbers.
LUXCOM Technologies Inc.
102 Walgreen Rd., Ottawa, Ontario, Canada
m
Revision 1.4 added universal power supply LTIPS-6-2-U.
K0A 1L0
www.luxcom.com
P/N 98-023-0
REV. 1.4
Tel: +1 (613) 831-7777
February 24, 2006
Fax: +1 (613) 831-7778
email: [email protected]