Lux Tools 380512, Руководство пользователя

Страница: 22 / 100

GB
22
– Check to make sure all unit components are cor-
rectly mounted.
Switching on and off
– To start the tool turning, press the On/Off
switch (5).
– To operate permanently, press the locking but-
ton (4) whilst holding down the the On/Off switch.
– Press the On/Off switch again and release to
release the lock.
– To switch the unit off, release the On/Off
switch [5] .
Drilling
– Hold the device straight and drill with even pres-
sure.
Cleaning
Cleaning and maintenance at a glance
Regularly and according to the operating condi-
tions
Troubleshooting
What to do when something doesn’t work…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Note: The revolution speed of the device
can be varied by applying different pres-
sures to the On/Off switch.
DANGER! Risk of injury! Never hold the
work piece that you are working with in your
hand, on your lap, or against other body
parts.
NOTICE! Risk of damage to the unit!
Never use the drill for chasing or to expand
drilled holes.
Always use a drill appropriate to the mate-
rial.
What? How?
Clean the ventilation slots
of the motor to remove
dust. Use a vacuum, cleaning
brush or paint brush.
Clean the device. Wipe the unit with a damp
cloth.
DANGER! Exercise caution – risk of
injury!
Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Error/Fault Cause Remedy
Tool holder does not turn. No power supply? Check the cable, plug, and the fuse.
Is the device defective? Contact your local vendor.
Revolution direction set incorrect-
ly? Switch the rotation direction reversing
switch.
Tool holder is turning, but the de-
vice is not drilling.
No hammer drilling function.
Mode switch is not set correctly? Put the switch to position [ ] .
No chasing function. Set the switch to position [ ] or [ ] .
Part number 380512
Rated voltage 230 V~, 50 Hz
Capacity 800 W
Protection class II
Nominal revolutions 0–1200 min
−
1
Hammer rate 0–5300 min
−
1
Impact energy 2,8 J
Tool receiving socket SDS-plus
Max. drill chuck diameter ce-
ment 26 mm