Lux Tools 196062, Руководство пользователя

Страница: 39 / 156

GB
39
• Stop the cutting blades when the mower
must be tilted to transport it over surfaces
that are not grass and when the mower is
being moved from and to the area to be
mowed.
• Never use the mower if the protective
mechanisms or protective mesh are dam-
aged. Never use without protective mech-
anisms, for example, deflector plates and/
or grass collection equipment.
• Start or activate the starter switch care-
fully in accordance with the manufac-
turer’s instructions. Make sure there is
sufficient space between your feet and the
cutting blades.
• When starting or starting up the motor, the
mower may not be tilted unless the mower
needs to be lifted for the process. If this is
the case, only tip it as far as is absolutely
necessary and only lift the side that faces
away from the user.
• Do not start the motor if you are standing
in front of the ejection duct.
• Never put hands or feet onto or under
rotating parts. Keep away from the ejec-
tion outlet.
• Never lift or carry a mower with the motor
running.
• Switch the motor off and remove the cir-
cuit breaker. Make sure that all moving
parts have come to a standstill:
– Whenever you leave the machine unat-
tended;
– Before you remove blockages or clogs
in the ejection duct;
– Before you check, clean or carry out
work on the mower;
– If a foreign object is hit.
• Look for damages to the mower and carry
out any necessary repairs before you start
it up again and continue to use the mower.
• If the mower starts to vibrate in an unusual
way, immediately check it.
• Look for damages;
• Carry out all necessary repairs to dam-
aged parts;
• Make sure that all nuts, bolts and screws
are tightened firmly.
Maintenance and storage
•
Ensure that all nuts, bolts and screws are
tightened and the tool is in a safe operat-
ing state.
• Check the grass collection equipment
regularly for wear or for loss of functional-
ity.
• For safety reasons, replace worn or dam-
aged parts.
• Remember that when using a tool with
multiple blades, moving one blade may
lead to the other blades rotating.
• When adjusting the machine, make sure
that no fingers are trapped between the
moving blades and fixed parts of the
machine.
• Allow the motor to cool down before you
put the machine away.
• When maintaining the blades, remember
that even if the machine is switched off,
the blades can still be moved.
• For safety reasons, replace worn or dam-
aged parts. Only use original spare parts
and accessories.
Your device at a glance
►
P. 3, item 1
1. Switch-on lever
2. Switch-lock
3. Handlebar
4. Handlebar, bottom part
5. Collection box
6. Lever for adjusting the cutting height
7. Ejection opening
8. Battery cover
9. Safety flap
10. Clutch lever for travel drive
►
P. 3, item 2
11. Battery pack
12. Display for remaining capacity
13. Push button for capacity display
14. Locking button
15. Control lights
16. Battery charger
Scope of delivery
• Operating manual
• Lawn-mower
• Handle
• Collection box
• Mulch wedge
• Ejection opening
• Battery pack (2×)
• Battery charger
• Circuit breaker
• Bag containing small parts
Note: The actual appearance of your
product may differ from the illustra-
tions.