StarGuide Maxi
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
p.13/24
350 mA
T: +32 3 293 35 50
–
www.lux-lumen.com
7
Installation setup
7.1
Specification
The StarGuide Maxi led-unit is a small and efficient solution which can be
easily integrated in a circular railing tube. Each order can be tailor made to
the dimensions of the tube.
It uses a current controlled power supply and all units are connected in
series. Up to 100 units can be connected, depending on the power supply
used.
Please note that dangerous voltages are used. Always disconnect the main
power of the complete installation, before executing any works on the
installation.
•
Power consumption each StarGuide Maxi led-unit: 1,2 W
•
Rated current input: 350 mA
•
Forward voltage over the led: ±2.8 to 3.2 volt (depending on binning
and color)
•
Body material is 15 µM anodized aluminum.
•
Resin is epoxy based and heat conductive.
•
Ingress protection: IP 67
•
Impact protection: IK2 / 10
•
Weight: 32 gr
•
Different lenses are possible:
o
Real spot: 11°
o
Spot: 15°
o
Medium: 30°
o
Wide: 50°
o
Asymmetrical: 34° x 18°
•
Transparent cover material is glass or polycarbonate.
The unit is
equipped with a ‘anti
-fu
se’, so in ca
se of failure of one unit in a
series string, all other units remain fully functional.
Standard cable length is 1200 mm for positive polarity, and 200 mm for
negative polarity, so maximum pitch is approximately 1000 mm between
the units.
Connections are done by using Scotchlok
™
connectors, supplied together
with the StarGuide MAXI led-unit.
