LUX LUMEN StarEye Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 25

LUX LUMEN StarEye Скачать руководство пользователя страница 9

StarEye Profile

p.9/25

LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM

T: +32 3 293 35 50

–

F: +32 3 293 35 44

www.lux-lumen.com

5

External connections

5.1

DC power input

Safety precautions

Never connect the live power on the input terminals of the StarEye Profile
LED-unit!

In case of doubts, contact your point of sale.

Polarity

The StarEye Profile LED-unit is polarity sensitive. So observe polarity and
cabling:

•

Inner conductor number 1 = positive

•

Inner conductor number 2 = negative

Improper connection might damage the StarEye Profile LED-unit and power
supply permanently. In case of inversed polarity, the warranty is void.

Power supply: Rated voltage

The requested input is 12 volt DC. Never apply a higher voltage to the units.
This will damage the units permanently. The power supply should be able to
provide at least 50 watt.

Cable

Please ensure yourself that the cable end is watertight sealed at the
connection. If this is not properly done, water can pass through the inner
conductors of the cable and damage the internal electronics of the StarEye
Profile LED-unit.

«
...
7
8
9
10
11
...
»

Содержание StarEye


























Отзывы:

Нет отзывов