Luvion ECO FAST DELUXE, Инструкция по эксплуатации

Страница: 12 / 24

12
wrist. When the temperature is too low after the heating cycle, briefl y put the bottle into the
bottle warmer unit and reheat it by adjusting the timer according to your preferences. When
the temperature is too high, let it cool down for a while before serving the baby.
TO KEEP WARM:
1.
Place the bottle basket (8) in the bottle warmer unit and place the bottle or jar (without lid)
in the middle of the bottle basket. Depending on the size of the bottle, you could use the
bottle ring (9) to help the smaller bottles fi t.
2.
Fill the container of the bottle warmer with the half amount of the bottle/jar content.
3.
Insert the plug into a 230Volts wall socket and turn on the bottle warmer (3).
4. Press the mode settings button (4) and select keep warm mode . The symbol fl ashes a
few times before it starts to work.
The default temperature is set to 37°C. Depending on the amount of milk or food, the tem-
perature can be adjusted by pressing on the button to decrease the temperature (6) to 35°C.
The adjustable temperature are from 35°C to 85°C
DISPLAY SYMBOL DESCRIPTION RANGE
Quick heating up mode, default
time 3 minutes
1-16 minutes
Keeps warm,
default temperature 37°C
35-85°C
TO DEFROST:
1.
Place the bottle basket (8) in the bottle warmer unit and place the bottle or jar (without lid)
in the middle of the bottle basket. Depending on the size of the bottle, you could use the
bottle ring (9) to help the small neck bottles fi t.
2.
Fill the bottle warmer holder with enough water (at least half as much water as the content
of the bottle or jar to be thawed, top up with water if necessary).
3. Insert the plug into a 230Volts wall socket and turn on the bottle warmer (3).
4. Press the mode settings button (4) and select keep warm mode function The symbol
fl ashes a few times before it starts to work. (the keep warm mode and defrost mode are the
same).
5. The default temperature is set to 37°C. Decrease the temperature for thawing, by pressing
on the decrease button, to 35°C (6).
Note: It is strongly recommended not to exceed the defrost function temperature above
35°C to prevent nutrient loss.