M a n u a l d e i n s t r u c c i o n e s
D e l u x e e x a c t - 6 0
U s e r M a n u a l D e l u x e e x a c t - 6 0
•
Working temperature: 10 ~ 40 0 C
•
Working humidity: <80%
•
Max. capacity: 20kg
•
Min. capacity: 100g
•
Graduation: 5g
•
Power supply: 4 x AA batteries
•
Low power indication: L o
•
Working Error indication: Err
•
Unit change: kg or lb
•
Memory function: optionally save and recall
weighing value
•
Turn off automatically (5 minutes)
•
Blue backlight
•
1.5m tape measure inside
Technical Specifications
Keys’ functions
•
ON/Z: Press the key to power on the scale and start up
weighing process. For zero setting, press the key again
to clear the display and “zero” annunciator will show in
the left lo corner of LCD. If you want to turn off the scale
please hold pressing this key for about 3 seconds.
•
MODE: Weighing units exchange key. Press the key to
select kg and lb in turn The suitable indicator of unit is
shown in LCD right side by kg or lb annunciator.
•
MEM: While the scale is in “0.00” situation, you can press
this key to recall the former one weighing value saved in
the memory and the suitable indicator is lighted. During
weighing if the key is pressed to show “SET” and the
stable value will be saved, otherwise twinkling value is
not saved in the memory.
Operation
•
After the batteries placed, press “ON/Z” key to start the
scale until “0.00” appears.
•
Gently place baby on the pan, weighing record will
be flashed on the window after a few seconds. If baby
remain lying on the pan after its weight value has shown,
the weighing value will continue to flash for 5 minutes
and then turn off automatically.
•
If take baby from the pan immediately after baby’s
weight has been flashed, the scale will return to “0.00”
and then turn off automatically within 5 minutes if no
operation again.
•
If see about the former saved weighing value, please
press the “MEM” key while the scale is in “0.00” position.
The scale will save optional value during each weighing
operation.
•
If need to measure the baby’ height. Taking out the tape
measure from the left side of the bottom. When the tape
withdraws to keep from touching the baby’ head and
other parts of body.
Cautions
•
The scale should be placed on a hard flat surface for
baby’s easement and safety.
•
You must replace batteries immediately when window
display “Lo”.
•
Keep the scale clean to ensure the normal working.
•
Take the batteries out if no operation for a long term.
•
Please place baby in the center of the pan otherwise
probably affect weighing accuracy.
•
Overload (heavier than 20.5kg) is strictly prohibited.
•
Be careful to withdraw tape measure to avoid touch and
hurting the baby.
