LION microPLC
▪
Mounting
23
7.7
EMC Shield Clip Set
To ensure EMC performance, according to the EN 50155:2017, it is mandatory to
install a shield clip set on the analog modules.
7.7.1
Measurements
Fig. 3: Measurements – I/O Module with EMC Shield Clip Set
7.7.2
Mounting
The EMC shield clip set (Part-No. 800204) is not in the scope of delivery.
NOTE:
For screw (3), observe the maximum torque of 0.55 Nm.
1. Mount the shield clip
(1)
and the
shield sheet
(2)
with the two screws
(3)
in the slot
(4)
on the backside of
the module.
Fig. 4: Mounting EMC Shield Clip Set
1P