Notes to EU conformity EASYPRO
57
Subject to technical changes.
200114
BA-42820-02-V03
Water sampling station
EASYPRO
Operating instructions
14 Notes to EU conformity EASYPRO
The
EASYPRO
water sampling station does not fall under the purview of
the Machinery directive 2006/42/EG.
The
EASYPRO
water sampling station falls under the purview of the pres-
sure equipment directive 2014/68/EU.
The values stated below do not exceed the limit values according to arti-
cle 4, paragraph 1. As such, the
EASYPRO
water sampling station is de-
signed and manufactured in accordance with valid good engineering
practice. In accordance with article 4 section 3, as a pressure device, the
EASYPRO
does not carry CE marking and cannot be issued with a EU dec-
laration of conformity.
Product description: Water sampling station
Type:
EASYPRO
Pressure stage:
PN6
Nominal diameter:
<DN20
Max. temperature:
65 °C
Medium:
Water
(H
2
O)
The
EASYPRO
water sampling station corresponds to the requirements of
the Pressure equipment directive 2014/68/EU.
The electronic controller installed on the
EASYPRO
water sampling station
is fitted with a CE mark and holds a EU declaration of conformity.
The manufacturer and distributor of the
EASYPRO
water sampling station
is:
Lutz-Jesco GmbH / Am Bostelberge 19 / 30900 Wedemark / Germany
