Lutz-Jesco MEMDOS LB, Руководство по эксплуатации

Страница: 13 / 44

Technical data
Other data
13
© Lutz-Jesco GmbH 2018
Subject to technical changes.
181112 BA-10407-02-V08
Motor-driven diaphragm dosing pump
MEMDOS LB
Operating instructions
5.2 Operating conditions and limits
Information Value
MEMDOS LB Size
4 – 1010
Approved ambient temperature °C 5 – 45 (with PVC components 5 – 40)*
Relative humidity % max. 90
Max. sound pressure level dB(A) 57 - 65
Max. supply pressure mbar 500
Viscosity limits mPa∙s 300** / 1000***
Adjustable dosing range % 0 – 100
Table 9: Operating conditions and limits
* Use of the dosing pump at ambient temperatures below 5 °C must be checked individually. In such cases, please contact the manufacturer.
** With a viscosity of ~300 mPa∙s and above, you must use spring-loaded valves.
*** If the viscosity is above 1000 mPa∙s, this must be checked individually and the stroke frequency must be between 50 and 100 strokes/min.
5.2.1 Approved media temperature
Information Value MEMDOS LB (all sizes)
Dosing head made of PVC °C 0 – 35
Dosing head made of PP °C 0 – 60
Dosing head made of PVDF °C 0 – 80
Dosing head made of stainless steel (1.4571) °C 0 – 80
Table 10: Approved media temperature
5.3 Other data
5.3.1 MEMDOS LB 4 - 80, 150
Information
Value
MEMDOS LB Size
4 4-HP 10 10-HP 20 20-HP 35 60 80 150
Weight (qith dosing head made of PVC)* kg 5.2 5.5 7.5
Weight (with dosing head made of PP)* kg 5.1 5.3 7.1
Weight (dosing head made of PVDF)* kg 5.3 5.6 8.2
Weight (with dosing head made of stainless steel
(1.4571))*
kg 6.7 7.3 12.7
Diameter of diaphragm mm 52 64 90
Stroke length mm 7.5 10
Protection class IP55
Nominal valve width DN4 DN6 DN10
Table 11: Other data MEMDOS LB 4 - 80, 150
* Specifications without motor. For weight specifications, see “5.4 Motor data” on page 14.