Note :
1) If intend to change the data logger sampling time, please
refer section 5-4, page 12.
2) If intend to know the space of balance data numbers into the
memory IC, please refer section 5-5, page 13.
3) If intend to clear the saving data from the memory please
refer section 5-6, page 13.
5. ADVANCED SETTING
PROCEDURE
Before executing advanced adjustment
procedures, exit the " Hold function " and the
Record " function.
a. Hold the " Setting Button " ( 3-5, Fig. 1 ) at least five
seconds will enter the Advanced Setting
Procedures.
b. One by one to press the " Setting Button " ( 3-5, Fig. 1 )
once a while to select the seven main function and show
the text the lower display as :
K...........Change thermocouple type to type K or type J
..........
℃
Change the Temp , unit
℃ ℉
OFF.......Auto power ON/OFF management
SP-t......Change the data logger sampling time
SPACE...To show the balance data numbers in the memory
CLr........Clear the existing saving data from the memory
Code.....Code entering for the further calibration usage
11