manualshive.com logo in svg
background image

All On

All Off

Favorite

RF Communication

System 

Visor

Advanced

Bridge 

Add

 

 

Power

Lutron 

|

 20

Need help? Contact Lutron Technical Support 24/7: 800.523.9466

frequently asked questions

How far away can I use  
my wireless controller?

  * 100 ft. typical range in  

any direction from the  
central antenna

What is the range of the 
central antenna?

The central antenna has a radio frequency range of at least 30 ft. in 
any direction.

Will other equipment in 
my home or neighboring 
homes interfere with my 
AuroRa

®

 system?

AuroRa

 operates at a frequency different from most remote controls,  

cellular/portable phones, and other wireless devices. The 
communication protocol ensures that any device operating at the 
same frequency will not affect your system.

What happens to the 

AuroRa

 system during a 

power outage?

AuroRa

 has non-volatile memory that maintains all system 

addressing and master control programming during a power 
outage. After the power outage, the memory restores all system 
lighting to its previous state before the power failure.

Can I replace or move a 
dimmer/switch after the 
initial installation?

Yes. One or all of the dimmers/switches can be relocated to different 
locations in the home, if the user prefers to control different lights. All 
system addressing, as well as master control and wireless controller  
programming remains unchanged.

Can I add to my 

AuroRa

 

system?

You can increase the capability of your 

AuroRa

 system by adding  

another complete package or by adding up to nine additional  
(ten total) wireless controllers (See “Bridging 

AuroRa

 Systems” on 

page 18 and “Activating additional Wireless Controllers” on page 19).

Can I use two 

AuroRa

 

dimmers/switches to 
control a light or a group 
of lights?

No. 

AuroRa

 dimmers/switches work with standard 3 or 4-way 

switches. Only one 

AuroRa

 dimmer can be used to control a light or 

group of lights.

Wireless Controller*

Содержание AuroRa AR-ENT-2S3D Series





























Отзывы: