Loosen the pre-assembled hex nut (CC1)
screwed onto the threaded nipple. Attach the
mounting plate (CC) to the junction box using
the screws (AA).
1
CAUTION:
Turn the power off at the main circuit breaker or
fuse box. Never rely on the wall switch alone to turn off power.
Detach the diffuser cage (A) and the diffuser (B)
from the fixture pan (C) by unscrewing the
preassembled screws.
5
ASSEMBLY INSTRUCTIONS
2
CC
AA
Hardware used
CC
AA
Screw
Mounting plate
x2
x1
A
B
C
1
2
CC1
WARNING:
Consult a qualified electrician if you are not
certain about the installation process. Always install wiring
connections in accordance with local code, ordinances and
the National Electric Code.
WARNING:
Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.