Understanding the Setup
STEPS TO FOLLOW
1. Connect keypad to PSC/BSC using RJ25 cable.
2. Connect water level sensor/ jumper on the sensor port of PSC/BSC. Note that only one
water sensor probe is required for the system. That sensor can be connected on either
VSC or BSC controller, while the other sensor input needs to have a jumper.
3. Connect Pump to the ‘Pump outlet’ and Light to the ‘Light outlet’ of the PSC/BSC.
4. Connect power cable to the power outlet and turn on the unit using power button on
keypad.
REPAIR & SERVICE INSTRUCTIONS
If you need to send a unit to us for repair, please follow the steps below.
A return must be coordinated with the store where the product was purchased for
return authorization from Luraco Health & Beauty LLC.
Carefully pack the item in its original carton, if available, or other suitable box to
avoid damage in shipping.
Before packing your unit; be sure to enclose:
1. Your name with full shipping address and telephone number
2. A dated receipt to show PROOF OF PURCHASE
3. A note detailing the problem you are having with the unit.