Discharge/Water Pump
MODEL L0807A
When using electrical equipment, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons, including the following:
1. Read and follow all instructions before using the pump
2. Check the pump label for proper voltage required. Do not connect voltage other than that shown
3. This pump is supplied with a grounding conductor plug. To reduce the risk of electric shock, be certain that is
connected to properly grounded receptacle
4. This is an in line pump, NOT a submergible pump
5. Support the pump and assembling and when installed. Failure to do so may cause pump to fail and piping to
break
6. Keep the cord out of heavy traffic area. To avoid fire hazard NEVER put the cord under rugs, near heat
generating devices
7. Always turn off the pump before servicing
8. Do not operate pump with a damaged parts
9. Never use the pump outdoor
10. Keep unit away from heated surfaces and open flames
11. Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the
warranty.
After reading this instruction, if you have any questions or comments, please call +1-817-633-1080 or contact our technical
support department at
or visit our website at
www.luraco.com
for more information
USER’S MANUAL
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
