Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 8 / 130

8
Hardware description
The LUPUSEC-XT1 control unit has three different control LEDs, which inform you
about the control unit’s status.
1.
Network status LED

Flashes green = network is being initialized or contact ID/notification
syntax faulty or not entered

Green on = network status and contact ID/notification syntax OK

Red on = network connection interrupted

Off = no power supply or system in “Add sensor mode”
2.
Burglar alarm LED

Flashes red = alarm currently active

Red on = control unit has an alarm in the system memory

Yellow on = central failure (e.g. low battery, open tamper contact, open
sensors are
not shown here)

Off = no abnormal messages
3.
Power LED

Red on = system armed

Flashes red = system in Home mode

Green on = system disarmed

Flashes green = system in “Add sensor mode”

Off = system in “Range test mode”
1 2 3