Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 25 / 130

25
Siren
Siren settings
Alarm tone
Activates or deactivates the internal siren of the XT1 control unit for a temporary test.
This function can
not be used to test additionally integrated sirens!
Setting: internal siren (control unit)
Use this option to set the cases in which the internal siren of the control unit is to be
activated.
The following options are available for selection:
Burglary, fire, water, panic, medical emergency
Setting: external siren(s)
If further sirens were installed in addition to the control unit, you can specify, in which
cases they are to be activated. If several external sirens were installed, you cannot
configure them differently, either all external sirens sound the alarm or none of them
does.
Similar to the internal siren, the following options are available for selection:
Burglary, fire, water, panic, medical emergency.
Note:
A possibly installed wireless relay reacts similarly to an external siren. If e.g. the
alarm for external sirens in case of burglaries is disabled, then the wireless relay will
not be activated as well in case of burglary alarm.