Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 22 / 130

22
Settings
Time settings

Delay upon entry
If someone enters the house with the LUPUSEC-XT1 being armed, you may
need a while e.g. to enter the code in the keypad. Specify this delay until the
alarm is triggered here. However, this delay is active only for sensors with the
“Entrance area” setting. Sensors with the “Burglary” setting trigger the alarm
immediately.

Delay upon exit
If you arm the alarm system e.g. to leave the house, you may need a while to
lock the door from outside. Specify this delay until the system is armed here.
Only after the specified time has elapsed, sensors with the “Entrance area”
setting will trigger an alarm.
Note:
This function is active only for arming with keypad or remote control.

Delay upon entry (Home mode)
In the Home mode, only sensors with the “Burglary” setting can trigger alarms.
If the Home mode is activated and a sensor with the “Entrance area” setting is
released, the alarm is triggered only after the specified time has elapsed. This
provides you with enough time to disarm the XT1.