Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 13 / 130

13
Note:
The Network LED lights up constantly green only if you assigned a notification
address for the alarm center to the system.
Access to the main interface of the LUPUSEC-XT1
The control unit is administrated via a web server in the control unit. On these web
pages, you can control all system functions of the XT1, add and edit sensors, arm or
disarm the control unit, check for open windows or doors, and view pictures from your
LUPUSNET HD network camera and recorder (if installed and connected).
To open the main menu of the control unit, proceed as follows:
1.
Start the link “LUPUSEC-XT1 network finder” from the CD (or enter the IP
address of the XT1 - if already known - in your browser).
2.
Click “Search”. The control unit should be found. Select the XT1 from the list with
the left mouse button.
3.
Click “Configure Setting”, if you want to change the IP settings of the control unit.
If your network includes a DHCP server, this should not be required. Otherwise,
e.g. in case of a direct connection via a crossover cable or no router/DHCP
server available, you need to assign an IP address to the control unit manually,
which is in the same network as your access device (PC, notebook…).