Installation Instructions
Ventvisor
®
Deflector
Page 1 of 2
I - Sheet Number
VV104 Rev.B
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic “brush-style” car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Car Wash Supplies
Clean Towel
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Alcohol Pad x2
Contents - 2 Piece Set
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
NOTE: Actual product may vary from illustration.
Preparation Before Painting / Installation
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Front Passenger
Side Visor
Front Driver
Side Visor
Front Passenger
Side Visor
Rear Driver’s
Visor
Rear Passenger’s
Visor
Alcohol Pad x4
Clean the chrome or black trim on the door frame with
an alchol pad, and wipe dry with a soft cloth.
1
2
Remove tape liner from front and rear flanges of visor. Peel back
2” (5 cm) of tape liner from each end of the lateral flange.
free end
free end
lateral flange
rear
flange
front
flange