I-‐Sheet Number THX11 Rev.B
I-‐Sheet Number THX11 Rev.B
4325 Hamilton Mill Rd. Ste. 400 | Buford, GA 30518 | 800.241.7219 | lundinternational.com
PART NUMBER:
34641522,
34641587, 34641595
PRODUCT:
Terrain HX Nerf Step
APPLICATION:
07-‐15 Jeep JK
Installation Instructions
CAREFULLY READ EACH STEP BEFORE ATTEMPTING TO INSTALL. 2012 AND NEWER JEEP JK 2-‐DOOR
MODELS REQUIRE THE USE OF AN ADDITIONAL BRACKET AS EXPLAINED IN THE FINAL NOTE AND
SHOWN IN FIGURE 3. 2013 AND NEWER MODELS REQUIRE THE REMAINING M8 X 35mm BOLTS
Step 1:
Identify Driver and Passenger side Nerf-‐step.
NOTE:
The passenger side front step is further
away from the bend.
See figure 1.
Step 2:
Depending on your cab model, you will have to identify which hardware you will have to use for
the upper mounts on the underside of the body. There will either be existing 6mm threaded holes for
the M6 x 20mm hex head bolts or open slots for the 3/8” speed clips and 3/8”x 1 ¼” Hex bolts.
See fig. 2
and fig.3.
Step 3:
If your model requires the 3/8” speed clips, install at this time.
See Fig. 3.
PARTS INCLUDED: QTY
Driver Side Step 1
Passenger Side Step 1
HARDWARE PACK: 1
M8 X 35mm Hex Bolt 6
M6 x 20mm Hex Bolt 12
M6 Nuts 12
M6 Washers 24
3/8” Fender Washer 6
3/8” x 1 ¼” Hex Bolt 6
3/8” Speed clips 6