Lunar DPX-IQ, Руководство оператора, Страница: 134 / 166

H-4 Specifications DPX-IQ Operator’s Manual
• Orthopedic Hip Scans
15.74" x 7.09" (40 cm x 18 cm)
333 scan lines x 300 sample points
H.3.3 Programs
Depending on the number of options you purchased, not all of the programs listed
below may be included with your software:
• AP spine scan and analysis
• Femur scan and analysis
• Lateral spine scan and analysis (optional)
• Total Body scan and analysis (optional)
• Forearm scan and analysis (optional)
• Hand scan and analysis (optional)
• Orthopedic Hip scan and analysis (optional)
• Quality Assurance
H.4 Environmental Specifications
Adhere to the environmental specifications that follow.
• Ambient Space (Interior Subcomponents): For scanner operation and
servicing, do not block the area around the scan table. Make sure there is a
minimum clearance of 12" (30.5 cm) at the head and foot ends of the scan table,
at least 6" (15.2 cm) for the arm side, and 18" (45.7 cm) for the operator side.
• Ambient Space (Ventilation): Do not block the cooling vents on the computer
and scan table. Make sure there is 6" (15.2 cm) from the console table to the wall
for cable clearance and computer plugs.
• Dust, Fumes and Debris: Install the system in a clean, ventilated area. Dust and
other airborne debris can cause the diskette drive heads and other sensitive
mechanical components to malfunction. LUNAR recommends that you do not
smoke in the scanner room.
• Humidity: Make sure the humidity for the scanner area is 20%–80%,
non-condensing.
• Static Electricity: Install and operate the system in a static-free area. Use anti-
static mats and adhere to minimum humidity requirements to prevent
malfunctions caused by static electricity.