LuminoLite Night Light Instruction Manual
The LuminoLite Night Light can be free-standing or wall mounted.
Your night light will come with batteries, adhesive tapes and hooks, screws and
screw anchors.
How to Install/Replace Batteries
1. Turn the night light so you are
looking at the back of the unit
and carefully remove the battery
cover.
2. Insert the batteries with polarity
in the correct position. As
indicated inside the case.
3. Place the battery cover back.
How to Turn on The Light
There is a switch on the side of the light
with three settings.
OFF, AUTO and ON
.
Simply slide the switch to your desired
setting.
AUTO
mode will activate the motion sensor
and the light will turn on for approximately
30 seconds when it detects motion before
automatically turning off again.
ON
mode will turn the light on and will stay
on until turned off again.
