•
Press and hold buttons 1 and 2
simultaneously, red LED is on all the time
•
After 3 seconds, the LED flashed red/green
and the alarm message is sent
•
To deactivate the alarm, go to a master unit
and reset the system. You cannot reset the
system using this fob
•
Test the battery at least one a week
•
To do this, press and hold button 1, marked with a spot as shown
until the led changes from green to flashing green/red
•
This will transmit the battery condition to the system and be
registered on the data base but only if used in conjunction with the
IP management system
•
If the IP management system is not fitted, then change the battery
every year as a precaution
NXFOB
- Mobile Panic Button
Set-up and User Guide
Operation
Maintenance