LUMINELL SL1 Скачать руководство пользователя страница 56

Страница: 56 / 72

9 FIRMWARE UPDATE

LUMINELL SWEDEN AB

9 FIRMWARE UPDATE

Luminell have developed a user-friendly update tool that soon will be available from Glamox
homepage, in the meantime contact

[email protected]

for update information.

The installation file contains both the tool itself and the firmware files, all in one application.
Updates include both fixes to increase performance and system stability but may also include
new features and language packs.

9.1 FIND YOUR DEVICE'S FIRMWARE VERSION

9.2 COMPUTER REQUIREMENTS

A computer that meets the following requirements is required to perform an update.

Administrator privileges are required to perform the firmware update.

Microsoft Windows 7 SP1

Ultimate/Pro/Home

(32bit/64bit)

Windows 8.1

(32bit/64bit)

Windows 10

Pro/Home

(32bit/64bit)

Interface

Ethernet port RJ45

CPU

Minimum specifications required by the OS or better

Memory

Minimum specifications required by the OS or better

1. Simultaneously press and hold light

and symbol

button for

seconds

to enter "

User menu

Step down to “

About

” and confirm with

3
s

System-ID:   589843
MAC-ID:    029690090025
Control Ratio : 1:9
OP SW ver:   20.7.1.1
MB SW ver:   20.7.1.1
TB SW ver:   19.45.1.1

About

Содержание SL1









































































Результаты поиска

Содержание SL1

Отзывы:

Бренды по названию

Популярные бренды

LUMINELL SL1, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SL1

Отзывы:

Бренды по названию

Популярные бренды